Start with the right power source
The Brook Power Bay Crimson is a compact Switch dock that also adds GameCube controller ports, USB ports, and Bluetooth. Before you connect anything, know that Switch TV mode requires external power. The dock itself does not run on its own battery.
Brook states that the Power Bay Series matches PD 3.0 fast-charging standards and can stably transmit 15V power. The Switch needs up to 15V to operate normally while playing and charging at the same time. The dock adjusts voltage during the charging process to protect the console. Use a PD 3.0-compatible power source that can supply the required 15V; the catalog does not specify a particular wattage or cable, so check your own power adapter’s PD 3.0 rating before relying on it for TV mode.
A practical setup sequence for the Crimson dock
Follow these steps in order so you can isolate any connection issue before adding accessories.
- Connect power to the dock: Plug a PD 3.0-compatible power source into the dock’s power input. The dock needs external power for Switch TV mode. Without it, the dock can still connect controllers, but it will not project the console screen to a TV.
- Connect the dock to your TV: Use an HDMI cable from the dock to your TV. The Power Bay Crimson supports HDMI output at Full HD 1080p 60fps. Note that HDMI output is not supported with Switch Lite.
- Dock the Switch: Place the Switch console in the dock. The catalog does not describe the exact docking procedure beyond the dock supporting TV mode, so align the console with the dock’s connector as you would with any Switch dock and avoid forcing it.
- Add GameCube controllers: Plug GameCube controllers into the two built-in GameCube adapter ports. Brook notes that these ports are designed for zero-latency play, and the GameCube controller is a common choice for Super Smash Bros. players because of low latency and stable connection. No separate power source is needed for GameCube controllers.
- Connect USB accessories: The two USB ports support Switch accessories such as controllers, headsets, expansion adapters, and even a Mario wheel. Brook designed these ports with input stability and low latency in mind. You do not need a power source to connect Switch controllers with USB ports or Bluetooth devices.
- Pair Bluetooth devices: The dock includes Bluetooth wireless connection. The catalog does not provide a pairing button sequence or list of supported Bluetooth profiles, so refer to the device’s own instructions for pairing. Once paired, Bluetooth devices do not require the dock to be powered for the connection itself, but TV mode still requires external power.
What the Crimson dock adds to your Switch setup
- Brook Power Bay Crimson dock for Switch: Only 1/6 size and 1/3 weight compared with a standard Switch dock. A smaller, lighter dock is easier to carry for local multiplayer sessions or travel, which fits the portability goal of the Power Bay series.

Brook Power Bay Crimson dock for Switch - Brook Power Bay Crimson dock for Switch: 2 GameCube adapter ports and 2 USB ports built-in. You can connect GameCube controllers for Smash and still have USB ports free for headsets or other Switch accessories without an extra adapter.
- Brook Power Bay Crimson dock for Switch: Supports HDMI output at Full HD 1080p 60fps, but not with Switch Lite. This confirms TV mode output for standard Switch models; Switch Lite owners cannot use the dock’s HDMI output.
- Brook Power Bay Crimson dock for Switch: Supports DP Alt-Mode for Type-C devices such as Android phones, with output up to 4K. The dock can also project a compatible phone or other Type-C device to a larger screen, so you may not need a separate adapter for that use.
- Brook Power Bay Crimson dock for Switch: Matches PD 3.0 fast-charging standards and stably transmits 15V power; voltage adjusts during charging to protect the console. Using a PD 3.0 power source helps ensure stable charging and TV mode operation while playing.
Charging tips that follow from the dock’s design
The Power Bay Crimson supports charging while playing, so you can keep the Switch topped up during longer sessions. Keep these points in mind:
- Use a PD 3.0 power source: The dock is built to work with PD 3.0 fast-charging standards. A non-PD or underpowered adapter may not deliver the 15V the Switch needs for normal operation and charging at the same time.
- Expect voltage adjustment: The Switch’s required voltage changes throughout the charging process. The Power Bay Crimson adjusts output voltage accordingly, which Brook states protects the console. This is normal behavior, not a fault.
- TV mode always needs external power: Even though the dock can connect controllers without power, projecting the console screen to a TV requires the external power source. Plan for a wall outlet or a sufficiently rated power bank if you want TV output away from home.
- Charging while playing is supported: You do not have to choose between playing and charging. The dock supports both at once, provided the power source meets the PD 3.0 requirement.
Compatibility checkpoints before you buy
The catalog confirms several compatibility details, but not every device or accessory is covered. Check these points against your own setup:
- Switch Lite and HDMI output: The dock’s HDMI output does not work with Switch Lite. If you own a Switch Lite, you can still use the dock’s controller ports and USB ports, but you cannot project the screen to a TV through this dock.
- GameCube controllers: The two built-in GameCube ports accept standard GameCube controllers. The catalog does not list specific third-party GameCube-style controllers as supported or unsupported, so test yours if you use a non-original pad.
- USB accessories: The USB ports are intended for Switch accessories such as controllers, headsets, expansion adapters, and the Mario wheel. The catalog does not provide a maximum power draw per port, so avoid connecting high-draw devices that are not designed for a Switch dock.
- Bluetooth devices: Bluetooth wireless connection is built in. The catalog does not specify which Bluetooth versions or profiles are supported, so pairing success may vary by device.
- Type-C devices and DP Alt-Mode: The dock supports DP Alt-Mode for Type-C devices like Android phones, with output up to 4K. Not all Type-C devices support DP Alt-Mode, so check your device’s specifications if you plan to use this feature.
What the supplied information does not settle
The catalog does not include a step-by-step pairing procedure for Bluetooth, a list of supported Bluetooth profiles, a maximum USB power output per port, or a specific recommended power adapter wattage. It also does not describe how to update firmware or whether the dock supports Switch 2 or other future consoles. If you need those details, check Brook’s official documentation or the product packaging before relying on the dock for those uses.
For standard Switch owners who want a smaller dock with GameCube ports and USB expansion, the Power Bay Crimson covers the core functions described in the catalog. Just pair it with a PD 3.0 power source and keep the Switch Lite HDMI limitation in mind.

