What the 3DO BT adapter does
The 3DO BT is a Bluetooth adapter that plugs into your 3DO console and lets you connect a wide range of Bluetooth controllers. It runs on the BlueRetro platform by Jacques Gagnon and supports PS3, PS4, PS5, Xbox One, Xbox Series S & X, Switch Joy-Cons, 8BitDo (Bluetooth only), and other Bluetooth controllers.
Setup is plug-and-play, but pairing each controller type follows its own steps. This guide walks through the general process and highlights the details that matter for a reliable connection.
Compatible controllers at a glance
- 3DO BT - 3DO Bluetooth Adapter: Supports PS3, PS4, PS5, Xbox One, Xbox Series S & X, Switch Joy-Cons, 8BitDo (Bluetooth only), and other Bluetooth controllers. Knowing which controllers work saves you from buying the wrong one or troubleshooting a device that isn't supported.

3DO BT - 3DO Bluetooth Adapter - 3DO BT - 3DO Bluetooth Adapter: Fits perfectly in FZ-1, FZ-10, and Goldstar 3DOs (other models untested). Check your console model before ordering to ensure a proper fit.
How to pair a Bluetooth controller with the 3DO BT
The exact pairing steps vary by controller, but the general process is the same. Follow these steps for most Bluetooth controllers.
- 1. Connect the 3DO BT to your console: Plug the adapter into the controller port on your 3DO. The adapter is plug-and-play, so no additional software is needed.
- 2. Put your controller into pairing mode: Each controller has its own pairing mode. For most, you hold a button combination until the LED flashes. Refer to your controller's manual if unsure.
- 3. Open the 3DO BT web interface: The adapter has an easy-to-use web interface. Connect to it from a phone or computer to manage paired devices and settings.
- 4. Pair the controller: In the web interface, scan for new devices and select your controller. Once paired, the controller should connect automatically each time you power on the 3DO.
- 5. Test the controller: Load a game and check that buttons respond correctly. If not, you can remap buttons in the web interface.
Pairing multiple controllers and original 3DO pads
You can connect up to 7 devices directly to the 3DO BT. If you want to use an original 3DO controller alongside Bluetooth controllers, you can connect it to the adapter for multiplayer sessions.
Bluetooth is limited to 7 devices, but there is a way to connect 8 devices using a Wii remote and BlueRetro mapping as explained by Jacques Gagnon.
What to do if your controller won't pair
If a controller doesn't appear or won't connect, try these checkpoints:
Make sure the controller is in pairing mode and not already connected to another device. For 8BitDo controllers, only Bluetooth models are supported—2.4G dongles won't work.
Check the 3DO BT web interface to see if the controller is listed. If it is, try removing it and pairing again. Also ensure the adapter is firmly seated in the console port.
Some controllers may need a firmware update or specific button combos to enter pairing mode. Consult the controller's documentation.
Latency you can expect
The 3DO BT offers very low latency, comparable to 2.4GHz devices, though exact numbers vary by controller. According to supplied data, PS4/PS5 controllers average about 5.4 ms, Xbox One about 8.8 ms, Switch Pro about 12.4 ms, PS3 about 12.8 ms, Wii U Pro about 13.2 ms, 8BitDo about 16.2 ms, and Wii Remote about 16.3 ms. These figures are typical and may differ slightly in your setup.
Button remapping and turbo
The 3DO BT supports button remapping that saves directly to the adapter, so your custom layout persists across sessions. Turbo functionality is also supported, which can be handy for certain games. Both features are accessible through the web interface.
Updating your adapter
The 3DO BT is open source and user updatable. Check the BlueRetro project for firmware updates and instructions. Keeping the adapter updated ensures compatibility with newer controllers and fixes.
Product details
- 3DO BT - 3DO Bluetooth Adapter: The 3DO BT runs on the BlueRetro platform by Jacques Gagnon, and a portion of each sale is donated to support the platform. You're supporting ongoing development of the open-source platform that makes this adapter possible.
- 3DO BT - 3DO Bluetooth Adapter: The adapter fits perfectly in FZ-1, FZ-10, and Goldstar 3DOs (other models untested). Confirm your console model to ensure physical compatibility.

