RetroTINK 2X-Pro Setup Guide for Retro Consoles

By 8BitMods - Retro and modern console games and accessories | Published: 2026-10-30

Category: How-to Guides

Learn how to connect and configure the RetroTINK 2X-Pro for retro consoles, including input selection, scanlines, and troubleshooting tips.

Quick Answer

Connect your retro console to the RetroTINK 2X-Pro using component, S-video, or composite, then plug the HDMI output into your TV. The converter auto-detects the video format, so you can start playing within minutes.

Why the RetroTINK 2X-Pro Works for Most Retro Consoles

The RetroTINK 2X-Pro is a compact HDMI converter that accepts component, S-video, and composite video from consoles like the SNES, N64, Genesis, and PS2. Its automatic format detection handles NTSC, PAL, and SECAM signals, so you don't need to fiddle with manual settings for most regions.

One trade-off: the 2X-Pro does not support RGB or VGA input. If your console outputs RGB (like a modded SNES or a PC Engine with a CD-ROM²), you'll need a different upscaler. Stick with consoles that use the three supported inputs for best results.

Step-by-Step Setup for the RetroTINK 2X-Pro

Connect the Video Cable: Plug your console's component, S-video, or composite cable into the corresponding input on the RetroTINK 2X-Pro. For composite, use the green jack (shared with component Y). Make sure the cable is fully inserted. Check that you're using the correct input jack; using the wrong one can produce no signal.
Power On the Converter: Connect the included USB power cable to the RetroTINK and a power source (like a USB wall adapter or TV port). The LED should light up. If it doesn't, try a different USB cable or port. A dead LED usually means no power—verify the cable and adapter are working.
Connect HDMI to TV: Use an HDMI cable to connect the RetroTINK's output to your TV. Select the correct HDMI input on your TV. You should see your console's image within seconds. If no image appears, confirm the TV is on the right HDMI input and the console is powered on.
Adjust Scanlines (Optional): Press the scanline button on the RetroTINK 2X-Pro to toggle scanlines. This adds a CRT-style effect that some players prefer. Press again to turn them off. Scanlines are personal preference; leave them off if you want a sharper image.
Troubleshoot No Signal: If you get no signal, check the video cable connection, try a different input jack, and ensure your console outputs a supported format (NTSC, PAL, etc.). If using a switch or splitter, bypass it and connect directly. Direct connections are more reliable; avoid extra adapters if possible.

Product Highlight

RetroTINK 2X-Pro Analog to HDMI Converter: Inputs: Component, S-video, Composite (shared with the green jack). Output: Digital Video. Automatic format detection for NTSC, PAL, PAL-60, PAL-M*, NTSC-443*, and SECAM*. You can connect a wide range of retro consoles without manual format switching, and the shared composite/green jack means you choose one input type at a time.
RetroTINK 2X-Pro Analog to HDMI Converter