How to Install and Use the 8BitDo Mobile Clip
By 8BitMods - Retro and modern console games and accessories | Published: 2026-10-20
Category: How-to Guides
Learn how to attach and adjust the 8BitDo Mobile Clip for the Ultimate 2 Controller. Step-by-step guide for a comfortable mobile gaming setup.
Quick Answer
Slide the 8BitDo Mobile Clip onto the mounting slot on your Ultimate 2 Controller until it clicks, then expand the clip to hold your phone securely. Adjust the angle for comfortable viewing.
What the 8BitDo Mobile Clip Is and Isn't
The clip is designed specifically for 8BitDo Ultimate 2 Wireless Controllers. It uses a detachable, scalable design that holds phones up to 85mm wide. The aluminum and ABS construction keeps it sturdy yet light enough for extended play.
It does not work with other controller models or non-8BitDo gamepads. If you have a different controller, you will need a universal phone mount instead. The clip also lacks a built-in charger or cable management, so plan for battery life if you play wirelessly.
Preparing Your Phone and Controller
Remove any thick case from your phone. The clip's expandable jaws grip the phone directly, and a bulky case may exceed the 85mm width limit or prevent a secure hold. A slim case is usually fine.
Make sure your Ultimate 2 Controller has fresh batteries or is charged. The clip adds no extra weight to the controller itself, but the phone will shift the balance forward. Test the setup in a safe spot before starting a long session.
Step-by-Step Installation and Use
- 1. Attach the clip to the controller: Hold the Ultimate 2 Controller face-up. Align the clip's mounting bracket with the slot on the back of the controller (between the grips). Slide it in until you hear a click. The clip should sit flush and not wobble. Common mistake: forcing the clip in backward. The bracket only fits one way; if it does not slide easily, flip it around.
- 2. Open the clip and insert your phone: Pull the two expandable arms apart. Place your phone horizontally or vertically inside the clip, then release the arms so they grip the edges. Adjust the arms until the phone is centered and held firmly. Check that the phone's buttons and charging port are not blocked. If the clip presses a side button, reposition the phone slightly.
- 3. Adjust the viewing angle: The clip has a hinge that lets you tilt the phone forward or backward. Tilt it to a comfortable angle that reduces glare and keeps your neck neutral. The hinge is stiff enough to hold position during gameplay. Do not overtighten or force the hinge past its natural range. It is designed for tilt only, not full rotation.
- 4. Fold and store when not in use: Remove the phone from the clip. Press the release button on the mounting bracket and slide the clip off the controller. Fold the clip flat by closing the arms and hinge. It stores easily in a pocket or small pouch. Leaving the clip attached adds bulk to the controller. Detaching it also prevents accidental damage to the clip's hinges during storage.
Product Details
- 8BitDo Mobile Clip for Ultimate 2 Controller: Compatible with 8BitDo Ultimate 2 Wireless Controllers. Detachable, scalable expandable clips hold mobile phones up to 85mm wide. Foldable for easy transport. Material: aluminum + ABS. The 85mm width limit covers most modern phones, but oversized or thick-cased devices may not fit. The foldable design makes it practical to carry in a bag when you are not gaming.
8BitDo Mobile Clip for Ultimate 2 Controller
