8BitDo Ultimate 2.4G Genshin Impact Controller Setup

Quick Answer

Pair your 8BitDo Ultimate 2.4G Genshin Impact controller by sliding the switch on the back to your platform (S for Switch, D for PC/Android), then press the sync button. Use the charging dock for hassle-free pairing and charging.

Setup Steps

1. 1. Charge the Controller: Place the controller on the charging dock and connect the dock to a USB power source (such as your console or a wall adapter). Let it charge for at least 30 minutes before first use. The LED on the controller will glow steadily when fully charged. A common mistake is trying to pair a dead controller. Always charge it first.
2. 2. Set the Platform Switch: Flip the switch on the back of the controller to the correct position: S for Nintendo Switch, D for Windows PC, Steam Deck, or Android. For Bluetooth-only devices like iPhone, iPad, macOS, or Apple TV, set it to the Bluetooth position (often marked with a Bluetooth icon). If the controller doesn't connect, check that the switch matches your device. The wrong position is the most frequent pairing issue.
3. 3. Enter Pairing Mode: Press and hold the sync button (small circular button on the top edge near the USB-C port) until the LED starts flashing rapidly. On Switch, go to Controllers > Change Grip/Order in the System Settings. On PC, ensure the dock is connected via USB. For Bluetooth devices, open the Bluetooth settings and select '8BitDo Ultimate 2.4G' from the list. The controller will time out of pairing mode after about 30 seconds. If it doesn't connect, press the sync button again.
4. 4. Configure Profiles (Optional): Press the profile switch button (located on the back near the USB-C port) to cycle through three custom profiles. Each profile can store different button mappings and paddle assignments using the 8BitDo Ultimate Software on PC or mobile. Switch profiles on the fly without re-pairing. Profiles are saved to the controller, so you can set one for Switch, one for PC, and one for mobile — then just switch as you change devices.
5. 5. Use the Back Paddle Buttons: The two Pro back paddle buttons (P1 and P2) can be mapped to any other button using the 8BitDo Ultimate Software. By default, they are unassigned. To use them, open the software, select the desired profile, and assign functions like jump, reload, or crouch. Don't forget to save the mapping to the controller. The paddles will retain their assignments even when you switch devices.

Product Highlights

• 8BitDo Ultimate 2.4G Wireless Controller - Genshin Impact: Compatible with iPhone, iPad, macOS, Apple TV, Windows PC, Steam Deck, Raspberry Pi, and Android devices. You can use the same controller across your gaming consoles, PC, and mobile devices without buying separate controllers for each.

  

• 8BitDo Ultimate 2.4G Wireless Controller - Genshin Impact: Includes a multifunctional charging dock that extends the 2.4G signal and keeps the controller always charged. The dock acts as both a charging station and a wireless receiver, so you get low-latency gameplay without worrying about battery life.